For starters…

In sustainability talk, first and foremost, the golden rule should be to REDUCE consumption before increasing production.

Rule number 2: Get what you can maintain. It’s no point getting the most expensive technology which is all so cool but you have no idea how to maintain or operate it properly.

In the present hype, these basic green design strategies are often not discussed, but are critical to how your building will perform, and how it’ll affect your bottom line. Instead, people opt for more visible and instant gratification that they are “saving” the environment, with superficial efforts like installing wind turbines and solar panels. Yes they are great and good to have, but they shouldn’t be your first priority.

Solar Orientation

In any new project like your home or a building, the most fundamental thing that will stay with the project is how the building is sited. Green design, especially passive design, starts with orientation. You CANNOT run away from the sun. Thus, it is imperative to get the most favorable orientation for your site if it’s possible.

Superinsulate

Insulation sounds like a really boring thing, but this humble stuff (eg. polyfoam, rock wool) is really critical to the performance of the building. In cold climates, the outdoor temperature may be freezing or below freezing. Indoors, it may be 24 degrees with heating. That is a whooping 20 odd degrees difference in temperature.

Insulation is going to keep that warmth in, and reduce your heating bill. Ignore it, and you’d be burning your cash to stay warm. Well insulated steel framed buildings are like steel framed buildings with a good solid set of protective armor on. Now that sounds better right? And asinsulation is comparatively so much cheaper, half a foot thick of insulation can save you the equivalent energy output from a whole array of solar panels are a fraction of the cost!

Very neat.

Stop the leakage

It’s no use having the best armor in the world if it has holes. Thus, hand in hand with insulation, the building must be airtight. This means that you can keep that warmth in, and the cold out, or vice-versa. The primary locations where steel framed buildings leak are through the gaps in windows and doors. As a result, you incur higher heating/cooling costs.

Get a builder to check that they are sealed properly to reduce leakage. Think of it as money flowing out of your doors!

Sun shading

Sunshading, along with insulation, are the two main protective features of the building’s outer skin. In the case of sunshading, it is critical in hot climates to shield the heat away. Without it, the temperature of the spaces within would increase and this would translate into higher air-conditioning costs. Moreover, sunshading cuts out glare from direct sunlight.

There are many examples of steel framed buildings in hot climates that are a glass box without a nary of a sunshade. These steel framed buildings often consume huge amounts of energy in cooling, and are highly unsustainable.

Natural Ventilation